Rhino

#LR40

Chassis Pole LED Light

LED light to fit in the outer end of Rhino chassis poles.  Multi voltage 12/24 Volt cable length 1 Meter. Amber Lens, with Amber Leds The caps have a small diameter of 39.7 mm, and the large...

#SSKIT

Spray Suppresant Kit (W\Clips)

-

#PL19.5CESKI-61

Guard Plastic 19.5 Ceski Orange 1200 x 580mm Guard Plastic 19.5 Ceski Orange 1200 x 5...

-

#STRQT606

Guard Stainless Steel Ribbed Qtr

-

#P50-70

Chassis Pole Cap 53mm

Caps are a tight fit into the chassis end of the Rhino chassis pole. Caps have a small diameter of 52.8mm and the large diameter is 56mm.

#STCAP50

Stainless Steel Cap - Inner

Plugs fit into Rhino stainless steel chassis poles. Outer End caps have a small diameter of 42.4mm and the large dia is 48mm.

#SC-814

Saddle Cap 50mm Silver

-

#SC-70

Saddle Cap 50mm Black

-

#STST1206

Guard S/S Rod Edged 1200x625mm

Roll formed in 1.2mm thick 304 stainless steel bright annealed (BA) finish that is cold rolled to retain a highly reflective finish. Both edges are rolled over a 10mm alloy rod. Stainless steel...

#AL1104

Guard Alloy 1100x400mm

-

#STR11063

Guard Stainless Steel Ribbed 1100x630mm

*Stamped in 1.2mm thick 304 stainless steel bright annealed (BA) finish that is cold rolled to retain a highly reflective finish. Both edges pressed to 30mm and the ends of each guard are double...

#STR12048

Guard Stainless Steel Ribbed 1200x480mm

Stamped in 1.2mm thick 304 stainless steel bright annealed (BA) finish that is cold rolled to retain a highly reflective finish. Both edges pressed to 30mm and the ends of each guard are double...