Products
Catalogues
ADOS Multi Purpose Spray Adhesive is a spray glue that bonds most materials quickly and easily, giving a long-lasting bond. It is formulated to give a fast tack-off, low-soak spray and dries clear.
Loctite 5 Minute Epoxy glue is a two-part, fast curing, non-shrinking, clear epoxy adhesive system developed to bond rigid materials. It will cure at high or low temperatures without the need for pressure-clamping. The resin and hardener portions in the...
ADOS F2 Multipurpose Contact Adhesive is a high-performance general-purpose contact adhesive. It is water-resistant and flexible and its high bond strength makes it ideal for a wide range of uses.
ADOS Red Gasket 260 is formulated for heavy duty, high temperature applications with a continuous service temperature of up to 260°C.
ADOS RTV Acetic Cure Silicone is a single component, fast curing, room temperature vulcanising silicone designed for glazing applications, general sealing and weatherproofing. It is suitable for use where etching of substrate is desirable e.g. glazing...
ADOS RTV Neutral Cure Silicone is a single component general purpose, fast curing, room temperature vulcanising silicone. Specially formulated and translucent in colour for use with most materials such as ceramics, steel, aluminium, concrete, brick,...
ADOS UHS is an ultra high strength contact adhesive which gives an immediate and permanent bond on a wide variety of surfaces. It is formulated to give low soak, cure fast, dry clear and be non-staining.
ADOS F2 Multipurpose Contact Adhesive is a high-performance general-purpose contact adhesive. It is water-resistant and flexible and its high bond strength makes it ideal for a wide range of uses.
ADOS F2 Multipurpose Contact Adhesive is a high-performance general-purpose contact adhesive. It is water-resistant and flexible and its high bond strength makes it ideal for a wide range of uses.
The revolutionary new way to make repairs. ADOS 121 is an epoxy polymer with glass fibres already integrated into the hardener – making use so easy. All the advantages of traditional fibre glassing with none of the disadvantages. Easy 1:1 mixing,...
ADOS Marine Waterproof Filler is a waterproof vinylester filler perfect for Marine applications both above and below the waterline. It can be used on all boat building materials including wood, fibreglass, composites, alloys and steel. It is also...
CRC RTV (Room Temperature Vulcanizing) Silicone Pressurized Tubes are designed for a wide range of sealing, bonding, protecting and waterproofing applications. The CRC Select-a-Bead™ nozzle allows for easy control of silicone bead width, with a unique...
12 of 60 products
