-
-
#AJ1016/001
Gudgeon Bolt On 1/2"
Stock availableA mild steel, self colour Ø12.5 x 50mm tailboard gudgeon pin for bolt on fixing.
-
#AJ101612NZ
Gudgeon Bolt-On 1/2" Fabricated
Stock availableSuited to our 12mm eye hinges, our bolt-on gudgeons are comprised of an 85mm x 25mm body manufactured from 5mm steel. This body houses two 7mm mounting holes to offer quick, simple assembly without compromising on strength.
-
-
-
#AJ3290/1NZ
Antiluce Straight
Stock availableAn antiluce manufactured from mild steel and finished with zinc plating. Instead of a standard shank, a 105mm x 25mm straight plate is attached to this fastener. With two 7mm mounting holes, this fastener is easily installed and removed. Material: Mild...
-
#AJ300125NZ-ZINC
Strap Hinge 12 x 1/2 x 3/16 Zinc
Stock availableStrap Hinge - Light Duty 1/2” Pin 40 wide x 5mm thick Eye size 1/2” (12mm) *Zinc-plated
-
#AJ3232NZ-NS
Antiluce No Shank
Stock availableA shankless, weld-on antiluce produced from mild steel and plated with zinc for protection against corrosion. Manufactured with a 26mm boss. Material: Mild Steel Finish: Zinc Plated Boss Diameter: 19mm Boss Length: 26mm
-
#AJ3284NZ
Antiluce Baby S/S M8
Stock availableStainless steel Boss: 12.7mm diameter, 59mm length Shank: 8mm Diameter, 40mm length M8 Thread. M8 Hex stainless steel nut
-
#AJ3275/1NZ
Antiluce 25mm Threaded
Stock availableProduced in mild steel with zinc plating. These antiluce fasteners are manufactured with an M12 threaded shank and are supplied with an M12 nyloc nut for simple, secure installation. Material: Mild Steel Finish: Zinc Plated Shank: 12mm diameter, 25mm...
-
#AJ3274NZ
Antiluce Baby Weld Type
Stock availableDesigned for use with scaffolding, this small antiluce is manufactured from mild steel with zinc plating. Produced with a 10mm long shank for weld-on installation. Material: Mild Steel Finish: Zinc Plated Boss Diameter: 12.7mm Boss Length: 30mm Shank...
-
#AJ3240NZ
Antiluce 10mm Female
Stock availableManufactured from mild steel and finished with zinc plating, this antiluce has a 15.8mm long shank which is internally threaded for simple installation. Material: Mild Steel Finish: Zinc Plated Boss Diameter: 19mm Boss Length: 32mm Shank Diameter: 13...
12 of 37 products