Welding and Engineering Consumables

12 of 21 products

  • #1477/500

    Anti Spatter Smootharc HD Spray 500G

    Stock available

    Anti-spatter water based spray that prevents weld spatter from adhering to metal surfaces and welding components. Ideal for steels, aluminium and alloys Non-flammable Paintable formula produces uniform spray without bubbles

  • #1467/400

    Smootharc Nozzle Dip Gel 400g

    Stock available

    400g nozzle dip anti-spatter gel that prevents weld spatter from adhering to metal surfaces and welding components. Ideal for steels, aluminium and alloys Non-flammable Paintable formula produces uniform spray without bubbles

  • #Y642543

    Rocol Flaw Finder Kit (3-Part)

    Stock available

    Rocol Flawfinder Kit (3 Part) 3 part crack detection kit. A fast reliable 3-pack method of crack detection of cracks or flaws that would not normally be visible to the naked eye. Ideal for welded joints and engineering components during maintenance or...

  • #Y552132

    Rocol RTD Spray 300g

    Stock available

    Rocol RTD Spray is an aerosol applied metal cutting lubricant that provides a film similar to that of RTD Liquid. It has the additional benefits associated with an aerosol application, such as convenience, cleanliness, thin film and safety.

  • #Y561411

    Rocol Ultracut Clear 20L

    Low in Stock

    Rocol Ultracut Clear is a high dilution, semi-synthetic general purpose water-mix cutting & grinding fluid formulated to provide optimum performance at high dilutions on a wide range of ferrous and non-ferrous metals, including stainless and alloy...

  • #Y550171

    Rocol RTD Liquid 500ml

    Stock available

    Rocol RTD Liquid is a medium viscosity metal cutting liquid containing extreme pressure additives for use in reaming, tapping, drilling and other metal cutting operations.

  • #Y550182

    Rocol RTD Liquid 5L

    Low in Stock

    Rocol RTD Liquid is a medium viscosity metal cutting liquid containing extreme pressure additives for use in reaming, tapping, drilling and other metal cutting operations.

  • #CRC3358

    CRC Weld Anti Spatter 400ml

    Stock available

    CRC Weld Anti-Spatter is an advanced technology lubricant formulated with a blend of release agents to prevent welding spatter from permanently adhering to surrounding metal surfaces. It quickly forms an efficient heat-resistant coating and eliminates...

  • #CRC3068

    CRC CDT Cutting Liquid 5L

    Low in Stock

    CDT Cutting Liquid is a heavy duty viscous fluid, integrating extreme pressure additives for use in reaming, tapping, drilling and metal cutting operations. It is suitable for all types of metal. CDT Cutting Liquid clings to the tool and work piece...

  • #CRC3064

    CRC CDT Cutting Liquid 500ml

    Stock available

    CDT Cutting Liquid is a heavy duty viscous fluid, integrating extreme pressure additives for use in reaming, tapping, drilling and metal cutting operations. It is suitable for all types of metal. CDT Cutting Liquid clings to the tool and work piece...

  • #CRC3063

    CRC CDT Cutting Oil 400ml

    Stock available

    CRC CDT Cutting compounds are superior neat cutting, drilling tapping, and reaming lubricants, formulated for hand and machine cutting on all types of metal. They significantly reduce friction and wear, increase cutting speeds, protect and extend tool...

  • #CRC3060

    CRC Cutting Compound 500M

    Stock available

    CRC Trefolex ‘Magic’ Cutting Compound is an active cutting compound paste that does not run off or evaporate. It melts slowly as frictional heat is generated and provides continuous lubrication throughout low speed cutting operations. It significantly...

12 of 21 products

Filter by