Products
Calculated Volume (dm³) = 0.863 Charging pressure = 3.6 bar Closing pressure dynamic 21 = 5.0 bar Closing pressure dynamic 22 = 5.0 bar Closing pressure dynamic 23 = 5.0 bar Closing pressure dynamic...
During the compressor's unloading cycle, the Sludge Remover captures contamination from the bottom of the reservoir. After pressure rebuilds the sludge is exhausted. Trucks and tractors only. Not...
Pressure Relief Valves are designed to open at a designated pressure thereby relieving air pressure buildup. Commonly used on truck, tractor, or bus air brake system reservoirs in the event that the...
Used to protect the air brake system in case of failure of an attached device. The built in check valve allows direct filling of system reservoirs from the supply line. Can be used to direct fill...
Used to protect the air brake system in case of failure of an attached device. The built in check valve allows direct filling of system reservoirs from the supply line. Can be used to direct fill...
Commonly used to protect air brake reservoirs from being depleted by the failure of other air accessory items. Valve opens at approximately 5 psi above nominal closing pressure & allows air to flow...
12 of 32 products
