Chassis Poles

12 of 13 products

  • #P50-70

    Chassis Pole Cap 53mm

    Stock available

    Caps are a tight fit into the chassis end of the Rhino chassis pole. Caps have a small diameter of 52.8mm and the large diameter is 56mm.

  • #CPO950

    Chassis Pole Offset 950mm Long

    Stock available

    The base pipe has one 17mm diameter hole to fit the pole to the chassis. The base pipe is 60 OD (Outside Diamater) and 51.3 ID (Inside Diameter). The offset / bent pipe is 150mm centre to centre and made from 40NB (nominal bore) steel with a 48.4 OD...

  • #CPO

    Chassis Pole Offset

    Stock available

    Rhino Chassis Poles are electroplated in a high quality ultra bright zinc silver or finished further with painting and can be installed directly onto chassis. Made from 40NB steel and offset for easy fitting. One 17mm diameter hole in the base, 750mm...

  • #STCPO-SATIN

    Chassis Pole Offset 150mm Stainless Steel Satin Chassis Pole Offset 150mm Stainless Stee...

    Stock available

    Rhino has the most comprehensive range of Stainless Steel Chassis Poles on the market. We have a range of lengths, fitting options and finishes to make your life easier fitting poles, saddles and mudguards. Length = 750mm Offset = 150mm Finish =...

  • #CPS

    Chassis Pole Straight Length 750mm

    Stock available

    Rhino Chassis Poles are electroplated in a high quality ultra bright zinc silver or finished further with painting and can be installed directly onto chassis. The pipe is straight with one 17mm diameter hole to fit the pole to the chassis. Pipe is...

  • #CPOLL

    Chassis Pole Offset 150mm Long Lug

    Stock available

    Rhino Chassis Poles are electroplated in a high quality ultra bright zinc silver or finished further with painting and can be installed directly onto chassis. The CPOL range is unique with the "Lug" giving the ability to fit two bolts to...

  • #CPOL

    Chassis Pole Offset c/w Tab

    Stock available

    Rhino Chassis Poles are electroplated in a high quality ultra bright zinc silver or finished further with painting and can be installed directly onto chassis. Made from 40NB steel and offset for easy fitting. The locking lug has two holes in it, one...

12 of 13 products