-
-
-
#10502-CH510
Folding T Handle
Stock availableFEATURES Stainless steel dish polished finish Heavy duty cast aluminium back Signature series rounded handle Includes lock barrel water cap IP65 rated Suitable for 1 or 3 point locking Dimensions Cam Height Adjustable: 36-49mm 124.5mm High 121.5mm...
-
-
#1954/120
Tail Door Swing-Out Kit 40mm Offset 120mm Tail Door Swing-Out Kit 40mm Offset 120m...
Low in StockTwo-Way Tail Door Kit Kit Contents: 1 x 1954S-1 - 40mm Hinge Pin 120 2 x 1954-2 - 40mm Top Bush 4 x 1954-3 - 40mm Weld Washer 1 x 1954-4 - 40mm Side Pin 2 x 1954-5 - 40mm Side Hinge Bush 1 Tailgate Latch 1 Tailgate Pin
-
#1953
Tail Door Swing-Out Kit 35mm
Stock availableTwo-Way Tail Door Kit Kit Contents: 1 x 1953-1 - 35mm Hinge Pin 2 x 1953-2 - 35mm Top Bush 4 x 1953-3 - 35mm Weld Washer 1 x 1953-4 - 35mm Side Pin 2 x 1953-5 - 35mm Side Hinge Bush 1 Tailgate Latch 1 Tailgate Pin
-
#1954
Tail Door Swing-Out Kit 40mm
Stock availableTwo-Way Tail Door Kit Kit Contents: 1 x 1954-1 - 40mm Hinge Pin 2 x 1954-2 - 40mm Top Bush 4 x 1954-3 - 40mm Weld Washer 1 x 1954-4 - 40mm Side Pin 2 x 1954-5 - 40mm Side Hinge Bush 1 Tailgate Latch 1 Tailgate Pin
-
#1952
Tail Door Swing-Out Kit 25mm
Stock availableTwo-Way Tail Door Kit Kit Contents: 1 x 1952-1 - 25mm Hinge Pin 2 x 1952-2 - 25mm Top Bush 4 x 1952-3 - 25mm Weld Washer 2 x 1952-5 - 25mm Side Hinge Bush 1 x 020683 - 20mm Tailgate Latch 1 x 020682 - 20mm Tailgate Pin
-
#AJ0500/004
Door Retainer Female
Low in StockA black nylon body recessed door retainer with internal/external release. 304 stainless steel faceplate and internal components.
-
#AJ0553/001
Door Retainer Hook 155mm
Stock availableA zinc plated pressed steel door retainer with a malleable iron 152mm T bar. For use with 0553/001 and 0554/001 catch plates.
-
#071923115
Welded Bar 3M 16mm Diameter
Stock availableBar assembled Ø 16 with welded cams. The customer is responsible for cutting the bar to the desired length. The two crop ends must be joined in the centre of the handle. The bar can then be connected by the pins and welded into the slot.
-
#AJ0550/001
Door Retainer Hook 105mm
Stock availableA zinc plated pressed steel door retainer with a malleable iron 105mm T bar. For use with 0553/001 and 0554/001 catch plates.
12 of 55 products