PRODUCT INFORMATION
- BLOX Safety Support block is designed to stabilise heavy loads that have been lifted for service, access or repair. The BLOX Safety Support is manufactured from a uniquely formulated compound consisting of recycled high-density polyethylene (HDPE) / Wood / and Polyurethane to create an alternative to traditional timber blocks. Typically, individual pieces are referred to as “blocks” and the structure or stacks are commonly described as “cribs”.
Features
- BLOX Safety Support and Jacking Block. Stackable Cup and Cone Profile 4cm x 10cm x 60cm, with Lanyard Orange.
- Weight: 2.2kg
- Working Load Limit (WLL): 122kg/cm2 (12MPa) at ambient/operating temperature of 250 C refer section 3 - Working Load Limit for further WLL data.
- Total Block WLL: 73,000kg at 250 C
Part No
BP41060LOBrand
BLOXWrite a Review
