Vertex AO Black Zinc Coat 400ml

PURPOSE

• Exceptional rust protection. Forms a tough coat for long-term protection. Easy application builds high film build in one step. Heavy-duty powerful protection in harsh conditions. High Heat Resistance
• Up to 500°C. Long-term corrosion protection - up to 6 years outdoors. Fast drying. Can act as the finish coat, no need for primer. Ready to Use Aerosol. Does not contain CFCs, methylene chloride. Excellent weldability.

APPLICATIONS

• Industrial equipment and machinery
• Roading and Construction •Bridges and guard rails •Wherever bare steel or iron needs to protection
• Farm equipment
• Fences, gates and farm implements
• Corrugated metal buildings
• Inner door anels, tow bars, exhaust tail pipes and wheel protection
• Structural steel or frames
• Welded seams and sport welding repairs
• Pipes and roofs
• Electrical-Transformers
• Transmission towers
• Boats and Boat trailers
• Shackles and winches
• Touch-up for galvanised products which have been cut, drilled or welded
• For use on steel or iron - Not effective when used on non-ferrous metals

DIRECTIONS

• Remove signs of corrosion with a wire brush or emery paper or similar. Clean surface with Vertex Brake Clean Extra Strength if required. Where possible, abrade surface before application. Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply with smooth even strokes to clean, dry surface holding can approximately 20cm from surface until desired coverage is achieved. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.