PRODUCT INFORMATION
-
This electric Actuator was designed from VDO for the purpose of operating a diesel engine injection pump lever in combination with a VDOelectronic controller.
-
Die-cast aluminum body with PTFEdiaphragm for pressure equalization. Three-stage transmission permanently engaged with the output shaft. A potentiometer with conductive traces provides feedback. It has a safety contact that opens when the output shaft is in a predefined position. Connection cable with Max. fixing torque
Part No
408411005013Brand
VDOVoltage
Rated Voltage = 24VRated
Rated Torque = 180Ncm (used in conjunction with electrical controller)Actuation
-Operating Temperature
from -40 °C to +120 °C (+140 °C max. 1 x 1h)Nominal Voltage
24 V or 12 VNominal Torque
180 Ncm (usedwith control ECU)Actuation Time
< 250 ms at the nominal voltage100 to 180 Ncm of actuation torqueCommutation Point Safety Contact
21° to 12.5° (closedwithout load)Protection Class
IP56 DIN 40050Angle of Mechanical Travel
120°Max. Tightening Torque of the Transmission Shaft
10 NmMax. Tightening Torque of the f xing Screws
8 Nm + 4 Nm (to 9 mm of screwing depth)Max. f xing torque
ITT Canon Sure Seal, 7-pinWrite a Review
