TengTools

#SD501

Teng Magnetic Pick-Up Tool

Telescopic magnetic pick up with an extra strong magnet, a pocket clip and a maximum extension of 85cm.

#MD911N

Teng Mega Drive Screwdriver Set 11pc

TT-MV PLUS steel blades for added torque. Bi-material handles for easy use with higher torque and faster speed. Hole in the handle for hanging or for use as a T-Handle for extra torque or with a...

#MB442-6

Teng MB H/D Side Cutter 160mm

Chrome molybdenum steel. 80° cutting edge angle. Single joint. Polished head. Rubber dipped handles. Length: 160mm Cuts piano wire: 2.0mm Cuts steel wire: 2.5mm Cuts iron wire: 2.5mm Cuts copper...

#M110070

Teng 1"Dr Power Bar 650mm

Chrome vanadium Satin finish for a better grip when handling sockets Pin detent on the male end to securely grip the socket Knurled grip area on the handle for a better grip particularly in wet or...

#ID515

Teng 1/2"Dr Heavy Duty Impact Driver Set 15pc Teng 1/2"Dr Heavy Duty Impact Driver Set...

Reversible action. Driver designed with 1/2in drive, but also equipped with a chuck in which bits with 5/16”in hex can be fitted. Supplied complete with 12 impact driver bits for slotted heads,...

#AT135

Teng Claw Pick-Up Tool

Flexible wire with non-magnetic claws. Press action to expand and contact. Excellent for reaching small items lost in hidden areas. 600mm long.

#492

Teng Straight / Left Tin Snip 250mm

Made of drop forged chrome-moly steel. Hardened to HRC 60-62. Compound action. Handles of pressed sheet metal. Two component handle with hanging hole. With return spring and locking lever...

#490

Teng Straight Tin Snip 250mm

Made of drop forged chrome-moly steel. Hardened to HRC 60-62. Compound action. Handles of pressed sheet metal. Two component handle with hanging hole. With return spring and locking lever...

#445W

Teng Mega Bite Plier Set 5pc

Set of 5 pliers. The pliers have polished heads and rubber dipped handles. Supplied in a handy tool roll. Side Cutters 4½" MBM441. Side Cutters 6" MB441-6. Combination Pliers 7"...

#4006T

Teng Adjustable Wrench 375mm

The Teng Tools 4003 series is a 8" (375mm) adjustable wrench. It has integral measurement scale on the jaw to check fastening sizes. It has a wider jaw opening that increases the bolt sizes...

#4005T

Teng Adjustable Wrench 300mm

The Teng Tools 4003 series is a 8" (300mm) adjustable wrench. It has integral measurement scale on the jaw to check fastening sizes. It has a wider jaw opening that increases the bolt sizes...

#3492AG-ER

Teng 3/4"Dr Torque Wrench 65-450Nm/48-330ft/lb L/R Teng 3/4"Dr Torque Wrench 65-450Nm/48-33...

Bi-directional for left/right hand threads with push through square drive and flip reverse ratchet action for torque checking. Equipped with angular gauge for after tightening. Dual scale Nm &...