TengTools

#MT08

Teng Measuring Tape 25mm 8M/26'

Yellow steel tape with a matt finish allowing reflection-free reading. The scale is protected by a nylon coating. Plastic case with flat underside for internal measuring. Power return tape, with...

#MT05

Teng Measuring Tape 19mm 5M/16'

Yellow steel tape with a matt finish allowing reflection-free reading. The scale is protected by a nylon coating. Plastic case with flat underside for internal measuring. Power return tape, with...

#PB16

Teng Roll/Heel Bar 16" 400mm

Round, ground point at one end – flat hook shaped pry bar at the other.

#PB20

Teng Roll/Heel Bar 20" 500mm

Round, ground point at one end – flat hook shaped pry bar at the other.

#T3840

Teng Metric Socket & Spanner Set 3/8"Dr 39pc Teng Metric Socket & Spanner Set 3/8"Dr ...

39 piece 3/8in drive socket set containing 6 point metric sockets, 6in extension bar, universal joint, coupler adaptor, 1/2F:3/8M T-bar adaptor, FRP ratchet, 9 combination spanners as well as 11...

#PPS06

Teng Pin Punch Set 3-8mm 6pc

150mm high carbon steel parallel pin punches heat treated to HRC52 +/-2 with the strike end tempered to HRC40 +/-5 and containing: 3, 4, 5, 6, 7 and 8mm parallel pin punches.

#T3867

Teng Metric Socket & Tool Set 3/8"Dr 67pc Teng Metric Socket & Tool Set 3/8"Dr 67p...

67 piece socket/tool set containing FRP ratchet, universal joint, 3in & 6in extension bars, coupler adaptor, 1/2F-3/8M adaptor, bits driver with magnetic holder, 14 regular sockets (8-22mm), 10...

#TC803SV

Teng SV-Series Middle (Stacker) Tool Box 3 Drawer Teng SV-Series Middle (Stacker) Tool Box...

Equipped with 3 drawers fitted with ball bearing slides. Lockable lock Lock with two keys. Red lacquered steel plate. 5-Step rust protection process. Heavy-duty carrying handles at the sides. Each...

#TCEMM417N

Teng General Metric EVA Tray Tool Kit 417pc Teng General Metric EVA Tray Tool Kit 41...

A comprehesive 417 piece tool kit with the tools laid out in three colour pre-cut EVA foam which clearly shows if any tools are not in their correct place. Supplied in the Teng Tools TC806NF 6 drawer...

#TCMM491N

Teng 491pc Mechanics Gen Metric Tool Kit c/w Roller Cabinet Teng 491pc Mechanics Gen Metric Tool Kit...

Set has 27 TC-Trays. Kit includes 1/4", 3/8" and 1/2" drive socket sets, combination spanners (8-32mm), screwdrivers and pliers plus a good selection of more specialised tools.

#TCW707EV

Teng 7 Drawer EV-Series Roller Cabinet

Ball bearing slides. Lock with 2 keys. Red lacquered steel plate. Five step rust protection. Heavy-duty side handle. 2 x swivel castors with brakes / 2 x fixed castors

#TCW810N

Teng 10 Drawer 8-Series Roller Cabinet

Red lacquered steel plate. 5-Step rust protection process. Two fixed castors and two swivel castors with brakes. Equipped with 10 lockable drawers fitted with ball bearing slides. Combination lock...