TengTools

#TMTX10

Teng Super Mini Impact TX Bits Set 10pc

Set Contents: TXP3001001 - TX10 TXP3001501 - TX15 TXP3002001 - TX20 TXP3002501 - TX25 TXP3002701 - TX27 TXP3003001 - TX30 TXP3004001 - TX40 MBHI14 - IMPACT MAGNETIC BIT HOLDER 60MM

#TTEISK73

Teng 3/8 & 1/2 Dr Metric Impact Set & Accessories Set 73pc Teng 3/8 & 1/2 Dr Metric Impact Set & Ac...

Set Contents: Extension bar: 175mm: Adaptors: 3/4F-1/2M & 3/4F-1M Std sockets: 19, 21, 22, 23, 24, 27, (1-1/16"), 28, 30, 32, 33, 34, 36, 38, 41, (1-5/8") & 46 (1-13/16") Deep...

#TTHEX23

Teng Hex Bits Set Metric TC-Tray 5-19mm 23pc Teng Hex Bits Set Metric TC-Tray 5-19mm ...

Set Contents: Bits 10mm -drive, length 40mm: 5, 6, 7, 8, 9, 10mm. Bits 12mm -drive, length 40mm: 12, 14, 17, 19mm. Bits 10mm -drive, length 75mm: 5, 6, 7, 8, 9, 10mm. Bits 12mm -drive, length 75mm:...

#TTTX23

Teng TX Bits Set TX20-70-40 - TC-Tray 23pc Teng TX Bits Set TX20-70-40 - TC-Tray 23...

Set Contents: Bits 10 mm -drive length 40mm: TX 20, 25, 27, 30, 40, 45, 50, 55. Bits 12 mm -drive length 40mm: TX 60, 70. Bits 10 mm -drive length 75mm: TX 20, 25, 27, 30, 40, 45, 50, 55. Bits 12 mm...

#TXP3002505

Teng 1/4"Dr Impact Bit x 30mm TX25 (5pk) Teng 1/4"Dr Impact Bit x 30mm TX25 (5pk)...

Features: 1/4 inch Drive Hex Type: TX25 Length: 30mm Quantity: 5

#WRPC10

Teng Punch & Chisel Set c/w Wall Rack 10pc Teng Punch & Chisel Set c/w Wall Rack 10...

6 parallel pin punches, 3 cold chisels and a center punch. Supplied on wall rack. Set Contents: Punches, tip diamerer: 3, 4, 5, 6, 7, 8mm Cold chisels, width x length: 18 x 150, 25 x 200, 25 x...

#WRMBV04

Teng 1000V VDE Plier Set & Wall Rack 4pc

Teng Tools Rack with 4 insulated pliers with two component handles, heavy duty side cutters, combination pliers, side cutters and long nose pliers. Each plier is individually tested and approved...

#3892AG-E1

Teng 3/8"Dr Torque Wrench 5-25Nm (4-18ft/lb) Teng 3/8"Dr Torque Wrench 5-25Nm (4-18ft...

Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque...

#401-10

Teng Power Grip Plier Curved Jaw 250mm

Chrome Vanadium. Self locking with release lever. Locking nut on adjustment knob for presetting.

#3892AG-E3

Teng 3/8"Dr Torque Wrench 20-110Nm (15-75ft/lb) Teng 3/8"Dr Torque Wrench 20-110Nm (15-7...

3/8" drive torque wrench which can be used for both tightening and final checking of the torque. The torque wrench is reversible with a lever but only for right hand action for torque checking...

#401-12F

Teng Power Grip Plier Flat Jaw 300mm

Quality locking pliers, self locking with release lever and locking nut for presetting. 401-12F – 300mm (12”) Flat Jaw, 50mm capacity.

#406S

Teng C-Clamp Locking Plier (NP) 285mm

C-shaped jaws for sections. Self- locking With single non- pinch release lever. Nickel plated.