Products
Catalogues
Made of drop forged chrome-moly steel. Hardened to HRC 60-62. Compound action. Handles of pressed sheet metal. Two component handle with hanging hole. With return spring and locking lever...
Set of 5 pliers. The pliers have polished heads and rubber dipped handles. Supplied in a handy tool roll. Side Cutters 4½" MBM441. Side Cutters 6" MB441-6. Combination Pliers 7"...
Zinc plated, Chrome Vanadium. Self locking, with release lever. With locking nut on adjustment knob for pre-setting. Capacity – 65mm.
Zinc plated, Chrome Vanadium. Self locking, with release lever. With locking nut on adjustment knob for pre-setting. Capacity – 65mm.
The Teng Tools 4003 series is a 8" (375mm) adjustable wrench. It has integral measurement scale on the jaw to check fastening sizes. It has a wider jaw opening that increases the bolt sizes...
The Teng Tools 4003 series is a 8" (450mm) adjustable wrench. It has integral measurement scale on the jaw to check fastening sizes. It has a wider jaw opening that increases the bolt sizes...
The Teng Tools 4003 series is a 8" (300mm) adjustable wrench. It has integral measurement scale on the jaw to check fastening sizes. It has a wider jaw opening that increases the bolt sizes...
The Teng Tools 4003 series is a 8" (250mm) adjustable wrench. It has integral measurement scale on the jaw to check fastening sizes. It has a wider jaw opening that increases the bolt sizes...
Set of 9 chrome molybdenum alloy hex key. Individually size marked. Supplied in folding plastic holder. With ball point hexagonal head at the long key end which permits turning even at a 30 degree...
Set of 9 chrome molybdenum alloy steel hex keys for added strength. With ball point end on the long hex key end for 30° access. Supplied in folding plastic holder. Sizes: 1.5, 2.0, 2.5, 3.0, 4.0, 5...
Chrome vanadium key sets supplied in folding plastic holder. Hex Keys with ball point head on the long key end - for 30° access. 1479TX – Torx (TX). TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30...
Set of 7 hex keys. Chrome vanadium steel. Ball point heads on the long key end which permits turning at a 30° angle. Supplied in plastic holder. 1474 – Imperial 1/8”, 5/32”, 3/16”, 7/32”, 1/4”,...
