Torches and Tips

#BOC100/0803

Smoothcut Plasma 100 Extended Spacer Connector Smoothcut Plasma 100 Extended Spacer Con...

Pack of 2 extended spacer connectors for hand cutting with the BOC Smoothcut 100 Plasma Cutting Torch

#BOC100/0901

Spacing Spring for Cut 100 Plasma Cutting Torch Spacing Spring for Cut 100 Plasma Cuttin...

A spacing spring suitable for use with the BOC Cut 100 Plasma Cutting Torch

#BOC100/0807

Smoothcut Plasma Torch Double Point Spacer Smoothcut Plasma Torch Double Point Spac...

Double point spacer for Smoothcut plasma 100 and 100B

#BOC25/706HT

Smoothcut Plasma 25 Torch for MAGCUT25 and CUT40 Smoothcut Plasma 25 Torch for MAGCUT25 a...

The Smoothcut Plasma 25 torch is a 6m torch designed for plasma cutting applications up to 40 amps, and for contact cutting up to 9mm in thickness. This torch is fitted with a two part connector and is suitable for use with the Magmate Cut 25 Plasma...

#BOC41-32GB

Nozzle Gouging Oxy-Acet Type 41 Size 32GB Nozzle Gouging Oxy-Acet Type 41 Size 32G...

BOC Oxy Acetylene Gouging Nozzle (Type 41)

#BP003.0013

Nozzle Spring MB25AK

Spring nozzle for the MB 25 AK gas cooled MIG/MAG welding torch

#BOCPA1504

Trafimet A141 6M Torch

Trafimet style 141 plasma torch 6m central adaptor

#BP014.H173

SWAN NECK ABIMIG 355 TURNABLE

A high quality turnable/swivel MIG torch swan neck, suitable for welding with wires between 1.0-1.6mm diameters. Replacement turnable torch neck. Rating: 360 A CO2, 320 A Mixed Gases 60% duty cycle Wire size: 1.0-1.6mm 45 degree swan neck S type handle

#BP141.0004

Contact Tip E-CU For Al 0.9mm M6 8mm 10pk Contact Tip E-CU For Al 0.9mm M6 8mm 10p...

Aluminium contact tips, M8 thread, 8mm.

#BP141.0006

Contact Tip E-CU for AL 1.0mm M6 8mm X10

Pack of 10 E-Cu M6 contact tip for Al wire, for MB 24 KD MIG/MAG welding torch

#BP142.0022

CONTACT TIP HOLDER 401/501D M8 PK2

Binzel Contact Tip Holder 401/501D M8 S - Pack of 2

#105541

BOC Oxy/Acetylene Heating Tip HTW-A3

BOC multi-flame heating tips are designed to provide large volumes of heat for applications such as bending, straightening, pre-heating, brazing, shrinking, forming and many others. They can be used to braze or silver solder large pipes, or can be used...