Products
Catalogues
A 45mm nylon replacement hammer face for Thorex soft face hammers
Thorex Nylon Soft Face Hammer soft finishing work. Faces are designed to wear and to be replaced by hand. All faces are one piece moulded. No metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent faces coming loose...
A 50mm Thor hammer replacement hammer face of pure electrolytic copper
The Copper face combined with the Malleable Iron head gives a SAFE but high-impact blow. Ideal where a heavy blow is required combined with a relatively small striking area. Faces are designed to wear and can be replaced.
The Copper face combined with the Malleable Iron head gives a SAFE but high-impact blow; whilst the Hide face gives a firm resilient blow that will not mark the finished work. Ideal where a heavy blow is required combined with a relatively small striking...
The Copper face combined with the Malleable Iron head gives a SAFE but high-impact blow. Ideal where a heavy blow is required combined with a relatively small striking area. Faces are designed to wear and can be replaced.
The DD750X is designed for durability and has the flexibility required to sharpen the largest range of dull or broken bits, including split points and masonry bits. The DD750X also adds increased capacity, sharpening 3/32” to 3/4” bits. One chuck...
91 of 91 products
