Striking and Prying

#222011

Tactix Ball Pein Hammer Fibreglass Handle 32oz Tactix Ball Pein Hammer Fibreglass Handl...

Features: 910g (32oz) Fully polished forged hammer head. Non-slip bi-material fibreglass handle.

#222565

Tactix Sledge Hammer Fibreglass Handle 12lb Tactix Sledge Hammer Fibreglass Handle 1...

Features: 5.4kg (12 lb) Forged hammer head. Non-slip bi-material fibreglass handle.

#223003

Tactix White Fibreglass Rubber Mallet 65mm Tactix White Fibreglass Rubber Mallet 65...

Features: 65mm Head Diameter Non-marking 24 oz Non-slip bi-material fibreglass handle.

#HMCH16A

Teng Carpenters Claw Hammer 16oz

With round face and octagonal throat. Chrome, oval steel handle covered with perforated rubber grip. Suspension hole on the end of handle to prevent hammer falling during working at heights.

#HMSF

Teng Rubber & Nylon Soft Face Hammer 32mm Teng Rubber & Nylon Soft Face Hammer 32m...

Double headed with a nylon and a softer rubber type head. Tubular steel shaft for extra strength. A comfortable, perforated rubber type handle. Soft face heads to reduce marking on the surface being hit.

#PB16

Teng Roll/Heel Bar 16" 400mm

Round, ground point at one end – flat hook shaped pry bar at the other.

#PB20

Teng Roll/Heel Bar 20" 500mm

Round, ground point at one end – flat hook shaped pry bar at the other.

#PPS06

Teng Pin Punch Set 3-8mm 6pc

150mm high carbon steel parallel pin punches heat treated to HRC52 +/-2 with the strike end tempered to HRC40 +/-5 and containing: 3, 4, 5, 6, 7 and 8mm parallel pin punches.

#TEXPB4

Teng Roll/Heel Bar Set with Tyre Lever - TEX-Tray 4pc Teng Roll/Heel Bar Set with Tyre Lever -...

4 piece set containing 3 pry bars and tyre lever. Supplied in a plastic TEX tray. Three colour EVA foam. Fits in Teng Tools tool boxes and roller cabinets. Roll/ Heel Bars: 12, 16, 20 inch Tyre Lever: 20 inch

#TTXPB3A

Teng Pry Bar Set 300/450/550mm TTX-Tray 3pc Teng Pry Bar Set 300/450/550mm TTX-Tray ...

Includes pry bars in three sizes and shapes to suit different applications Organised in a tool tray module size X4 (TTX4)

#THF-R50

Thor #16R Replacement Hammer Face 50mm Rawhide Thor #16R Replacement Hammer Face 50mm R...

A 50mm rawhide replacement hammer face

#THF-R45

Thor #14R Replacement Hammer Face 45mm Rawhide Thor #14R Replacement Hammer Face 45mm R...

A 45mm rawhide replacement hammer face