Holesaws

#AT3350

Holemaker Gold Series Annular Cutter 33mm x 50mm DOC Holemaker Gold Series Annular Cutter 33m...

Holemaker Uni Shank Tinite (Tin) Cutter 33mm X 50mm

#AT3325

Holemaker Gold Series Annular Cutter 33mm x 25mm DOC Holemaker Gold Series Annular Cutter 33m...

Holemaker Uni Shank Tinite (Tin) Cutter 33mm X 25mm Depth = 0.05m Height = 0.12m Width = 0.05m

#AT3450

Holemaker Gold Series Annular Cutter 34mm x 50mm DOC Holemaker Gold Series Annular Cutter 34m...

Holemaker Uni Shank Tinite (Tin) Cutter 34mm X 50mm

#AT3425

Holemaker Gold Series Annular Cutter 34mm x 25mm DOC Holemaker Gold Series Annular Cutter 34m...

Holemaker Uni Shank Tinite (Tin) Cutter 34mm X 25mm

#AT3525

Holemaker Gold Series Annular Cutter 35mm x 25mm DOC Holemaker Gold Series Annular Cutter 35m...

Holemaker Uni Shank Tinite (Tin) Cutter 35mm X 25mm

#AT3550

Holemaker Gold Series Annular Cutter 35mm x 50mm DOC Holemaker Gold Series Annular Cutter 35m...

Holemaker Uni Shank Tinite (Tin) Cutter 35mm X 50mm

#AT3625

Holemaker Gold Series Annular Cutter 36mm x 25mm DOC Holemaker Gold Series Annular Cutter 36m...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: Increased surface hardness to...

#AT3650

Holemaker Gold Series Annular Cutter 36mm x 50mm DOC Holemaker Gold Series Annular Cutter 36m...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: Increased surface hardness to...

#AT3725

Holemaker Gold Series Annular Cutter 37mm x 25mm DOC Holemaker Gold Series Annular Cutter 37m...

Holemaker Uni Shank Tinite (Tin) Cutter 37mm X 25mm

#AT3750

Holemaker Gold Series Annular Cutter 37mm x 50mm DOC Holemaker Gold Series Annular Cutter 37m...

Holemaker Uni Shank Tinite (Tin) Cutter 37mm X 50mm

#AT3825

Holemaker Gold Series Annular Cutter 38mm x 25mm DOC Holemaker Gold Series Annular Cutter 38m...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: Increased surface hardness to...

#AT3850

Holemaker Gold Series Annular Cutter 38mm x 50mm DOC Holemaker Gold Series Annular Cutter 38m...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...