Crimped Wire Decarb Brush 19mm Flat End 6mm Shank Crimped Wire Decarb Brush 19mm Flat End ...
Ideal for removing rust and corrosion from most metals, and decarbonising in automotive applications. Suitable for use with low speed air tools and drills.
Ideal for removing rust and corrosion from most metals, and decarbonising in automotive applications. Suitable for use with low speed air tools and drills.
Unique design allows the parts tray to close fully flat for easy storage Height adjustable to suit different applications Suitable for safely storing small parts, nuts, bolts and screws Strong rubber covered magnetic base prevents scratching on...
1600 kPa 2nd scale psi R 1/4-IS07 (DIN2999) back mount, glycerine filled case, stop-pin at zero. Second scale is Red.
Large magnetic end hook Class II accuracy printed blade, controlled by precise equipment Nylon coated blade for MAXIMUM durability Rubberized case protects end hook and button Moulded black rubber around yellow case designed for comfort and...
Chrome molybdenum steel. 80° cutting edge angle. Single joint. Polished head. Rubber dipped handles.
Estwing's Gooseneck Bars pull; pry and straighten; with an angled chisel on one end for prying and lifting; and the other end is slotted for pulling nails.
This tool works to take all the hassle out of stripping wiring, and actually turns the whole task into an enjoyable and therapeutic experience. No longer is the process a multi-handed juggle, with one hand grasping the tool whilst another pulls on the...
Tray Size: 560 x 110 x 60mm Tray Weight: 9.0kg Set of 3/4" impact sockets - 8 regular and 7 deep as per DIN-standard. Chrome Molybdenum. DIN Spec. Supplied in a plastic TC tray. Fits in Teng Tools tool boxes and roller cabinets. Contents: Regular...
Tray Size: 265 x 142 x 50mm Tray Weight: 0.6kg Reduced blade diameter (RBD) with integrated protective insulation. TT-MV PLUS steel bar resists bending and snapping. Individually tested, VDE insulation up to 1000 V, according to EN 60900/IEC 60900...
Thorex Nylon Soft Face Hammer soft finishing work. Faces are designed to wear and to be replaced by hand. All faces are one piece moulded. No metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent faces coming...
Thorex Nylon Soft Face Hammer soft finishing work. Faces are designed to wear and to be replaced by hand. All faces are one piece moulded. No metal pegs or inserts to damage the workpiece when worn. Serrations in the metal head prevent faces coming...
The Copper face combined with the Malleable Iron head gives a SAFE but high-impact blow; whilst the Hide face gives a firm resilient blow that will not mark the finished work. Ideal where a heavy blow is required combined with a relatively small...
168 of 1126 products