Air Tools

#A50006OF

Air Chuck Lock On Open Flow 1/4" BSP

Maximum working pressure of 150psi (10 Bar) 1/4" BSP(f) thread Trigger activated lock-on mechanism Durable long lasting TPU seal Hardened internally threaded collet and sleeve Sliding sleeve securely locks the air chuck onto the valve Heavy duty...

#A50007CF

Air Chuck Lock On Closed Flow 1/4" BSP

Maximum working pressure of 150psi (10 Bar) 1/4" BSP(f) thread Trigger activated lock-on mechanism Durable long lasting TPU seal Hardened internally threaded collet and sleeve Sliding sleeve securely locks the air chuck onto the valve Heavy duty...

#M7-QG103

M7 Air Nibbler Up Cut Style 1.6mm Cut Capacity M7 Air Nibbler Up Cut Style 1.6mm Cut Ca...

FEATURES Strengthened punch for increased tool life. Pull type cutting head for durability. Rear exhaust reduces the noise level. Specifications Strokes Per Min: 2600 Cut Capaticy: 1.6mm Air Requirements: 3 CFM / 90 PSI Inlet: 1/4" Overall...

#M7-PA201

M7 Hydraulic Air Riveter 14mm Stroke

Superb quality pneumatic air riveter. Traction Power: 3534lb.f / 1603kgf Stroke Length: 14mm Capacity: 2.4-6.4mm Air Requirement: 90PSI / 2.32CFM Air Inlet: 1/4" Net Weight: 1.8kg Sound Pressure: 79.7 dBA Vibration Level: 0.5m/s² Aluminium Rivet...

#M7-QA0115B

M7 Air Die Grinder Set 15pc

Contents: 1pc Die Grinder (M7-QA111B) 1pc 1/8" Collet 1pc 1/4" Collet 2pcs spanner wrench 5pcs 1/8" Shank Mounted Point 5pcs 1/4" Shank Mounted Point 1pc Plug Blow Mould Carry Case Specifications: Collet Size: 1/4" &...

#M7-PB2402

M7 Hydraulic Nut Setter M4-M10

Suitable for use with: Steel M4 - M10. Comes with mandrel sizes: M4, M5, M6, M8 & M10 Traction Power: 3638lbf / 1650kgf Stroke Length: 9mm Capacity: Steel M4 - M10 Air Requirements: PSI / 90L/Cycle Air Inlet: 1/4" Net Weight: 1.55kg Sound...

#M7-QE443

M7 Air Drill Heavy Duty 1/2" 1100RPM

FEATURES: Superb quality pneumatic drill. Chuck Size: 1/2" (13mm) Free Speed: 1100RPM Air Requirements: 4 CFM / 90 PSI Inlet: 1/4" Overall Length: 270mm Net Weight: 1.73kg Sound Pressure: 90 dBA Vibration Level: 3m/s²

#M7-QE843

M7 Air Drill Q-Series 800RPM 1/2"

FEATURES: Quiet Operation. Chuck Size: 1/2" (13mm) Free Speed: 800RPM Air Requirements: 4 CFM / 90 PSI Inlet: 1/4" Overall Length: 210mm Net Weight: 1.8kg Sound Pressure: 83 dBA Vibration Level: 0.3m/s²

#ARWC34

Teng 3/4"Dr Air Impact Wrench Composite 1830Nm Teng 3/4"Dr Air Impact Wrench Composite ...

Three forward steps up to 450Nm Reversible for tightening or loosening Forward/reverse button for one handed operation High torque action Extra lightweight composite housing Sound absorbent housing for noise reduction Twin hammer mechanism for increased...

#ARWM12M

Teng 1/2"Dr Air Impact Wrench Mini 770Nm

Three forward steps up to 680Nm Compact and lightweight for use in confined spaces Extra high torque capacity for the size and weight Jumbo clutch mechanism Reversible for tightening or loosening Forward/reverse button for one handed operation Extra...

#TTDAWM13M

Teng 1/2"Dr Mini Air Impact Wrench Set - TTD Tray 13pc Teng 1/2"Dr Mini Air Impact Wrench Set -...

Compact and lightweight 1/2" drive impact wrench For use in confined spaces Supplied with stubby 1/2" drive impact sockets Supplied in the unique TengTools TT2 module to be used within the Tool Control system Organised in a tool tray module...

#SI-1320A

Shinano Ratchet Wrench 3/8" Sq Drive

Super compact for hard to reach areas only 125mm long wobble drive output - specially shaped square drive which allows the socket to rotate at an angle like a universal joint. This enables the ratchet wrench to get into even tighter spaces one-handed...