workshop and automotive | TWL NZ - Page 37

0508 677 704
17 Branches Nationwide
Please note, we cannot ship goods outside of New Zealand

Saved Items

444 of 3755 products

36
37
...
42

Compare

#AT2650
Holemaker Gold Series Annular Cutter 26mm x 50mm DOC Holemaker Gold Series Annular Cutter 26m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$102.33

$88.98 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#AT2625
Holemaker Gold Series Annular Cutter 26mm x 25mm DOC Holemaker Gold Series Annular Cutter 26m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$79.12

$68.80 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#AT2825
Holemaker Gold Series Annular Cutter 28mm x 25mm DOC Holemaker Gold Series Annular Cutter 28m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$79.12

$68.80 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#AT2850
Holemaker Gold Series Annular Cutter 28mm x 50mm DOC Holemaker Gold Series Annular Cutter 28m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$111.83

$97.24 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#AT3025
Holemaker Gold Series Annular Cutter 30mm x 25mm DOC Holemaker Gold Series Annular Cutter 30m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$89.76

$78.05 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#AT3050
Holemaker Gold Series Annular Cutter 30mm x 50mm DOC Holemaker Gold Series Annular Cutter 30m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$121.39

$105.56 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#AT3225
Holemaker Gold Series Annular Cutter 32mm x 25mm DOC Holemaker Gold Series Annular Cutter 32m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$95.05

$82.65 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#AT3250
Holemaker Gold Series Annular Cutter 32mm x 50mm DOC Holemaker Gold Series Annular Cutter 32m...

Stock available

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits: • Increased surface hardness...

$124.69

$108.43 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#M7-PB2402
M7 Hydraulic Nut Setter M4-M10

Low in Stock

Suitable for use with: Steel M4 - M10. Comes with mandrel sizes: M4, M5, M6, M8 & M10 Traction Power: 3638lbf / 1650kgf Stroke Length: 9mm Capacity: Steel M4 - M10 Air Requirements: PSI / 90L/Cycle Air Inlet: 1/4" Net Weight: 1.55kg Sound...

$1,501.21

$1,305.40 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#M7-QE843
M7 Air Drill Q-Series 800RPM 1/2"

Low in Stock

FEATURES: Quiet Operation. Chuck Size: 1/2" (13mm) Free Speed: 800RPM Air Requirements: 4 CFM / 90 PSI Inlet: 1/4" Overall Length: 210mm Net Weight: 1.8kg Sound Pressure: 83 dBA Vibration Level: 0.3m/s²

$253.00

$220.00 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#TH216-50
Thor #216 Copper Rawhide Hammer 2380g 50mm Thor #216 Copper Rawhide Hammer 2380g 50...

Low in Stock

The Copper face combined with the Malleable Iron head gives a SAFE but high-impact blow; whilst the Hide face gives a firm resilient blow that will not mark the finished work. Ideal where a heavy blow is required combined with a relatively small...

$206.60

$179.65 excl. GST

Add to Cart The item has been added

Add to Saved List
Compare

#800060
Sykes-Pickavant Motorq 60 3/8"Dr Torque Wrench 10-50Nm Sykes-Pickavant Motorq 60 3/8"Dr Torque ...

Low in Stock

Soft feel ergonomic handle that provides exceptional grip even in oily conditions Large easy to read dual scale for improved visibility, precise torque setting adjusts 40% faster Push/pull torque adjustment knob that allows for rapid and accurate torque...

$502.15

$436.65 excl. GST

Add to Cart The item has been added

Add to Saved List

444 of 3755 products

36
37
...
42