Products
Catalogues
Alemlube L Series grease nipple 1/4" UNF 67.5° angle
Alemlube 1/8" BSP 90 degree grease nipple 10 pack Grease nipples to fit equipment for all situations
Works with all grease gun types - pneumatic, manual and battery 1/8” NPT thread Maximum working pressure of 10,000psi (690bar) Fits all metric and SAE specification grease nipples 4 hardened spring steel jaws resilient under high pressure Durable...
Delivers up to 600g/min High pressure delivery of grease up to NLGI#2 Supplied complete with 1/4" ID hydraulic grease hose, heavy duty grease control valve, 20kg drum cover and follower plate Low air consumption at 150psi / 3.6 cfm Air inlet...
Interlocking or aggressive non-slip surface **Non-conducting plastic resists oil and most chemicals Does not splinter, like wood Operating temperature range is -40 °C to +80 °C Made from 100% recycled plastics Durable crib blocks safely support and...
Interlocking or aggressive non-slip surface **Non-conducting plastic resists oil and most chemicals Does not splinter, like wood Operating temperature range is -40 °C to +80 °C Made from 100% recycled plastics Durable crib blocks safely support and...
Interlocking or aggressive non-slip surface **Non-conducting plastic resists oil and most chemicals Does not splinter, like wood Operating temperature range is -40 °C to +80 °C Made from 100% recycled plastics Durable crib blocks safely support and...
CRC Belt Dressing minimises squeals in automotive belts. It forms a non-drying, water-resistant film, extending belt life by reducing tension, slipping, and dirt build-up. Belts stay pliable without glazing or hardening, reducing squeaking noise...
Designed for extra torque to use with stubborn nuts and bolts Ball bearing socket retainer on the square drive for secure grip Chrome vanadium Satin finish for a better grip when handling sockets Ergonomically designed bi-material handle for easy use...
Off set at 15° for easier use on flat surfaces TengTools hip grip design for contact with the flat side of the fastening Chrome vanadium satin finish Supplied in a handy tool roll style wallet Designed and manufactured to DIN3113A
Double cut burrs for rapid stock removal in harder materials 6mm shank made from S45C Steel Made from solid carbide, offering the ideal combination of hardness & toughness for high speed applications Diameter d1 (mm) = 10 Diameter d2 (mm) = 6 Length...
Cylindrical Carbide Burs The chisel tooth pattern not only minimises tool chatter but reduces the chip to a granular shape, in most materials. Al Cut for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would...
204 of 3426 products
