Products
Catalogues
-
BLOX Riser 10degree 12cm x 25cm x 92cm with lanyard orange. Working Load Limit (WLL) 60.8kg/cm sq at 25 deg C. Total WLL calculated on contact surface area.
Universal rubber strap wrench for removal of filters, caps, tubes up to 150mm diameter Conforms to irregular shapes for removal without damage Strap width: 20mm
Pre-moistened towelettes. Impregnated with 70% Isopropyl Alcohol. Durable, soft non-Woven material. 75 wipes per self dispensing canister. Suitable for disinfecting a wide variety of surfaces.
Broad chemical compatibility Suits low-medium viscosities Reusable Cap to suit 38mm neck Dip Tube = 400mm
Meets FDA standards Easy action pump, drainback inhibited Suits most viscosities Polypropylene construction Cap to suit 45mm neck
Thermal Cut Off Oxygen 5/8" Inlet & Outlet Connection Normal Flow Regulator End Complies with AS4603 The gas non-return valve prevents leakage or the sudden return of air or oxygen in the distribution line or single cylinders. Extinguish...
Thermal Cut Off Fuel 5/8" Inlet & Outlet Connection Normal Flow Regulator End Complies with AS4603 The gas non-return valve prevents leakage or the sudden return of air or oxygen in the distribution line or single cylinders. Extinguish...
Thermal Cut Off Oxygen 5/8" Inlet & Outlet Connection Normal Flow Torch End Complies with AS4603 The gas non-return valve prevents leakage or the sudden return of air or oxygen in the distribution line or single cylinders. Extinguish flashback...
Thermal Cut Off Fuel 5/8" Inlet & Outlet Connection Normal Flow Torch End Complies with AS4603 The gas non-return valve prevents leakage or the sudden return of air or oxygen in the distribution line or single cylinders. Extinguish flashback...
Fittings Attached (5/8"UNF) 20m Length 1.2 MPa (1200kPa) working pressure (LPG) 1.2 MPa (1200kPa) working pressure (Oxygen) 10mm inner hose diameter 18mm outer hose diameter Suitable for use with Oxygen-LPG welding and cutting equipment Complies...
Manufactured to AS1335 8mm inner hose diameter 15mm outer hose diameter 1.2 MPa working pressure (Oxygen) 1.2 MPa working pressure (LPG) Suitable for use with Oxygen-LPG welding and cutting equipment 5/8" UNF fittings included 10m length
168 of 3432 products
