Heavy Transport Accessories

#SS175R-RV

NLA - Wheel Cover 17.5 RR Bigrig S/S

-

#0050-1

Pliers Nut Cover 32mm - 41mm

Pliers to suit 32mm-41mm.

#BALGRIP

ALCOA Pliers for Stainless Steel Nut Covers ALCOA Pliers for Stainless Steel Nut Cov...

Alcoa Pliers for Stainless Steel Wheel Nut Covers

#076188

ALCOA Hub Cover System Kit Front Suits Clamp On Nut Cover ALCOA Hub Cover System Kit Front Suits ...

Hub Piloted Hub Covers - includes: 1 Hub Cover, 10 Screw on Hug-A-Lugs with Clamps 1 Wrench Fitting: Cover is secured by screwing the 001881 onto the inner clamp. Inner clamp is placed on stud threads.

#001881

Alcoa Hug a Lug N/Cover Interlocking Clip Alcoa Hug a Lug N/Cover Interlocking Cli...

Off-White Interlocking Clip

#077185

ALCOA Hub Cover System Kit Rear Suits Screw On Nut Cover ALCOA Hub Cover System Kit Rear Suits S...

Hub Piloted Hub Covers - includes: 1 Hub Cover 10 Screw on Hug-A-Lugs with Clamps 1 Wrench Fitting: Cover is secured by screwing the 001881 onto the inner clamp. Inner clamp is placed on stud threads.

#077188

ALCOA Hub Cover System Kit Rear Suits Clamp On Nut Cover ALCOA Hub Cover System Kit Rear Suits C...

Hub Piloted Hub Covers - includes 1 Hub Cover, 10 Screw on Hug-A-Lugs with Clamps, 1 Wrench Fitting: Cover is secured by screwing the 001881 onto the inner clamp. Inner clamp is placed on stud threads.

#000600

Alcoa Nut Cover Wrench Plastic

Cap Nut Cover Wrench

#000181

ALCOA Hug a Lug N/Cover Suits 33mm Hex Push on Plastic ALCOA Hug a Lug N/Cover Suits 33mm Hex P...

Alcoa Hug a Lug N/Cover Suits 33mm Hex Push on Plastic

#088100S

ALCOA One-Piece Chrome Hub Cover System Kit Front 10x 285.75 ALCOA One-Piece Chrome Hub Cover System ...

Front Axle Kit includes: Two front covers, six retention nuts, and one removal tool. Use a short handle rubber mallet for installation. Requires a minimum of 3 threads per stud.

#089100S

ALCOA One-Piece Chrome Hub Cover System Kit Rear 10 x 285.75 ALCOA One-Piece Chrome Hub Cover System ...

Rear Axle Kit Includes: Two rear covers, six retention nuts, and one removal tool. Use a short handle rubber mallet for installation. Requires a minimum of 3 threads per stud.

#BALCOV33

ALCOA S/S N/Cover Suits Retrofit Nut 33mm Hex ALCOA S/S N/Cover Suits Retrofit Nut 33m...

Alcoa Branded NutCover Suits Retro-Fit33mm Nuts