Products
Seal & Bearing Ring Kit for CS07/3 Stage Cylinder
Inlet Diameter = 102.12 mm (4.02 inch) Outlet Diameter = 102.12 mm (4.02 inch) Body Diameter Maximum = 202.95 mm (7.99 inch) Disclaimer: Product name information is generic only, please check the correct fitment for your vehicle. Contact TWL for...
Allows air to flow through the valve in only one direction from inlet to outlet. Commonly used ahead of and in between reservoirs and on Control Line (Booster) valves. Inlet Port (NPT) = 1/2'' Outlet Port (NPT) = 1/2''
Relay Valve Size = 97 x 104 x 112 mm Maximum Operating Pressure = 145.04 psi
Kit: Exhaust + Charging Valve Size: 98 x 65 x 81 mm
Solenoid Valve Size = 40 x 131 x 68 mm Maximum Operating Pressure = 13.0 bar
These spring brake valves are designed for protected reservoir systems and feature service brake priority operation. Units manufactured after October 1992 meet current FVMSS 121 standards. The built in control port prevents brake compounding.
Controls the air pressure automatically in the air supply system between the desired predetermined maximum and minimum pressures. Operates in conjunction with the compressor unloading mechanism.
Adjustable pressure protection valve. Closes flow when inlet pressure drops below set pressure. Inlet Port: 1/4" NPT Outlet Port: 1/4" NPT Factory Set Opening: 80 PSI Minimum Adjustable: 20 PSI Maximum Adjustable: 85 PSI
WABCO Silencer 22mm Size: 0.068 x 0.068 x 0.055m Diameter: 0.069m
Gauge suitable for coupling and drawbar eyes 40/50
Wheel-Internal Sensor Strap Sensor Size: 54 x 30 x 12 mm
2748 of 3657 products
