-
-
#AWS167502
Speedglas Towelling Sweatband for 100 & 9000 Helmets Pk of 2 Speedglas Towelling Sweatband for 100 & ...
Stock availableReplacement towelling sweatband for Speedglas 9000 series welding helmets - Pack of 2
-
#AWS426000
Speedglas Std Outer Cover Lens for 9000 series helmets 10pk Speedglas Std Outer Cover Lens for 9000 ...
Low in StockProtect outside of welding lens from sparks and splatter. Replacement outside cover lenses for your Speedglas 9000 welding helmet. Replace once to twice a week depending on use.
-
#AWS427000
Speedglas Hard Coated Outer Cover Lens for 9000 series 10pk Speedglas Hard Coated Outer Cover Lens f...
Low in StockProtect outside of welding lens from sparks and splatter. Scratch-resistant hard coating for increased protection and durability. Scratch-resistant hard coating for increased protection and durability. Replace once a week depending on use.
-
#AWS428000
COVER LENS INSIDE PK5
Low in StockProtects the inside of your welding lens from sparks and splatter. Replace once a month depending on use
-
#AWS526000
Speedglas 9100 Standard Outside Cover Lenses - Pk10 Speedglas 9100 Standard Outside Cover Le...
Low in StockProtects the outside of your Speedglas 9100XXi welding lens from sparks and splatter. Replace once to twice a week depending on use.
-
#AWS776000
COVER LENS OUTER STD 100 PK 10
Low in StockEssential for the care & maintenance of your 3M Speedglas 100 welding helmet. Replace once to twice a week depending on use.
-
#AWS837010
Speedglas Particle Filter for Adflo PAPR
Low in StockPlease note: A prefilter must also be used. Replace once a month depending on use (assuming the prefilter gets replaced 1-2 times per week).
-
-
#BOCTW0515A
BOC Oxy-Acetylene Hose Twin Assembly 5mm x 15M BOC Oxy-Acetylene Hose Twin Assembly 5mm...
Low in StockHose twin assembly 5 mm with fittings for Oxy-Acetylene
-
#SP16003
Holemaker Pilot Pin 6.34mm x 77mm (15-52mm x 25DOC) Holemaker Pilot Pin 6.34mm x 77mm (15-52...
Stock availableFeatures: Ejects the slug at the end of the cut. Provides coolant feed into the centre of the cutter. Locates the centre of the cut.
-
#SP16004
Holemaker Pilot Pin 6.34mm x 102mm (15-52mm x 50DOC) Holemaker Pilot Pin 6.34mm x 102mm (15-5...
Stock availableFeatures: Ejects the slug at the end of the cut. Provides coolant feed into the centre of the cutter. Locates the centre of the cut.
2820 of 10000 products