ITM

#TM123-100

ITM Soft Vice Jaws Rubber Face 100mm

Easy to use. Simply place over existing jaws. Protects work piece from scoring or marking. 2 Magnetic tabs holds jaws in place. Supplied as a pair.

#TM123-150

ITM Soft Vice Jaws Rubber Face 150mm

Easy to use. Simply place over existing jaws. Protects work piece from scoring or marking. 2 Magnetic tabs holds jaws in place. Supplied as a pair.

#TM400-200

ITM Bench Grinder 600W 200mm

FEATURES: Powerful 600W Induction Motor. 25mm width grinding wheels with 36 and 60 grit for fast removal of material. Cast iron body and base for long lasting performance. Vibration absorbing pads...

#TM098-125

ITM Cast Iron Shop Bench Vice 125mm

Hardened steel jaws. Close grained cast iron body. Jaw Width: 100mm Max Jaw Opening: 110mm Jaw Depth: 57mm

#TM098-200

ITM Cast Iron Shop Bench Vice 200mm

Hardened steel jaws. Close grained cast iron body. Jaw Width: 200mm Max Jaw Opening: 200mm Jaw Depth: 79mm

#TM098-150

ITM Cast Iron Shop Bench Vice 150mm

Hardened steel jaws. Close grained cast iron body. Jaw Width: 150mm Max Jaw Opening: 150mm Jaw Depth: 79mm

#TM101-125

ITM Cast Iron Multi-Purpose Bench Vice 125mm ITM Cast Iron Multi-Purpose Bench Vice 1...

Superb quality multi purpose bench vice with 360° swivel rotation with safety locking nuts. The body of the vice is reversible with 3 sets of configurations for use with both flat or rounded...

#TM104-100

ITM Fabricated Steel Bench Vice Offset Jaw 100mm ITM Fabricated Steel Bench Vice Offset J...

Jaw Width: 100mm Max Jaw Opening: 120mm Jaw Depth: 70mm Jaw Type: Offset Base Length: 165mm Base Width: 150mm Hole Centre Length: 135mm Hole Centre Width: 115mm

#TM104-125

ITM Fabricated Steel Bench Vice Offset Jaw 125mm ITM Fabricated Steel Bench Vice Offset J...

Jaw Width: 125mm Max Jaw Opening: 140mm Jaw Depth: 95mm Jaw Type: Offset Base Length: 200mm Base Width: 180mm Hole Centre Length: 170mm Hole Centre Width: 150mm

#TM104-150

ITM Fabricated Steel Bench Vice Offset Jaw 150mm ITM Fabricated Steel Bench Vice Offset J...

Jaw Width: 150mm Max Jaw Opening: 170mm Jaw Depth: 105mm Jaw Type: Offset Base Length: 230mm Base Width: 200mm Hole Centre Length: 200mm Hole Centre Width: 170mm

#TM104-200

ITM Fabricated Steel Bench Vice Offset Jaw 200mm ITM Fabricated Steel Bench Vice Offset J...

Jaw Width: 200mm Max Jaw Opening: 265mm Jaw Depth: 135mm Jaw Type: Offset Base Length: 300mm Base Width: 250mm Hole Centre Length: 255mm Hole Centre Width: 200mm

#TM7000-050

ITM Twist Knot Cup Brush Steel 50mm

TM7000-050 | ITM Twist Knot Cup Brush Steel 50mm Specifications Material: Steel Wire Diameter: 50mm Thread: 1/4in Hex Wire Diameter: 0.5mm Max RPM: 12,000