Holemaker

#HMPRO35K1

Holemaker PRO35 MagBase Drill with Bonus Cutter Set Holemaker PRO35 MagBase Drill with Bonus...

The Holemaker PRO 35 is a high quality, compact and robust, fully featured machine. Weighing in at just 10kg, this machine is ideal for those on-site and overhead tasks. Features include a...

#SP16003

Holemaker Pilot Pin 6.34mm x 77mm (15-52mm x 25DOC) Holemaker Pilot Pin 6.34mm x 77mm (15-52...

Features: Ejects the slug at the end of the cut. Provides coolant feed into the centre of the cutter. Locates the centre of the cut.

#SP16004

Holemaker Pilot Pin 6.34mm x 102mm (15-52mm x 50DOC) Holemaker Pilot Pin 6.34mm x 102mm (15-5...

Features: Ejects the slug at the end of the cut. Provides coolant feed into the centre of the cutter. Locates the centre of the cut.

#SPFLUID

Holemaker Cutting Fluid 500ml

Features: Water soluble cutting fluid - mix 1 part oil, 8 parts water Formulated to extend tool life and improve surface finish Contains Corrosion Inhibitors to protect machine parts High resistance...

#SPFLUID1

Holemaker Cutting Fluid 1 Litre

Features: Water soluble cutting fluid - mix 1 part oil, 8 parts water Formulated to extend tool life and improve surface finish Contains Corrosion Inhibitors to protect machine parts High resistance...

#AS1225

Holemaker Silver Series Annular Cutter 12mm x 25mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED...

#AS1250

Holemaker Silver Series Annular Cutter 12mm x 50mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED...

#AS1350

Holemaker Silver Series Annular Cutter 13mm x 50mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED...

#AS1325

Holemaker Silver Series Annular Cutter 13mm x 25mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED...

#AS1450

Holemaker Silver Series Annular Cutter 14mm x 50mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED...

#AS1425

Holemaker Silver Series Annular Cutter 14mm x 25mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED...

#AS1625

Holemaker Silver Series Annular Cutter 16mm x 25mm DOC Holemaker Silver Series Annular Cutter 1...

M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life. STEP HARDENED...