PRODUCT INFORMATION
Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth).This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Model 6290-VVC high-speed propane/natural gas machine cutting tip with an electroless nickel-plated shell (.088 cup depth).This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVC tip is used with low-cost fuel gases. Use next size larger tip with same PSIG for contour or intricate cutting. For thin plate cutting use a highly carburizing preheat flame. Measure cutting oxygen pressures at torch entry. When using two hose machine torches, set oxygen pressure at cutting oxygen PSIG.
Features:
- Two-piece machine cutting tip
- Electroless nickel-plated outer shell and brass internal shell construction (.088 cup depth)
- Premium high-speed
- Minimizes kerf
- Increased cutting speed reduces heat input
- High quality cuts, reduce afterwork
- For use with low cost alternate fuel gases - propane/natural gas (NOT FOR USE WITH ACETYLENE)
- Typical applications include hand cutting, machine cutting, fabrication, shipbuilding, etc.
- Marked with model number and tip size for easy identification
Part No
2.5VVCWrite a Review
