BOC

#105616

BOC Cutting Attachment Control Valve

Flip-back cutting lever that allows easy attachment of the blowpipe and replacement of cutting valve components. Enhanced design that reduces the potential of flashbacks.

#105555

BOC Oxy/Acetylene Maxi-Heating Tip HT-A2

DA (L/min): 67 Oxy (L/min): 74 Heat Output (kJ/hr): 220,000

#105618

BOC Mixer O-Ring Kit

Spare or replacement o-rings

#105630

BOC Acetylene Gauge 0-4000kPa

0-4,000 kPa acetylene gauge for regulators and flowmeters

#002.0712.1

Binzel MB EVO PRO 15 Welding Torch 3M

Binzel MB EVO PRO 15 features unique internal geometry for air cooled torches – enabling a cooler grip with maximum mechanical strength. Genuine two-component handle – robust and ergonomic. Optimum...

#012.0373.1

Binzel MB EVO PRO 24 Welding Torch 5M

Binzel MB EVO PRO 24 features unique internal geometry for air cooled torches – enabling a cooler grip with maximum mechanical strength which is available in 3, 4 or 5m cable length. Genuine...

#106512

Flashback Arrestor Regulator End High Flow Fuel Gas Flashback Arrestor Regulator End High Fl...

BOC FBAs conform to AS4603 and carry international approvals. Gases maximum working pressure: Acetylene (A) 150 kPa LPG (P) 500 kPa Methane (M) 500 kPa Hydrogen (H) 400 kPa

#014.0531.1

Binzel MB EVO PRO 36 Welding Torch 5M

Binzel MB EVO PRO 36 features unique internal geometry for air cooled torches – enabling a cooler grip with maximum mechanical strength which is available in 3, 4 or 5m cable length. Genuine...

#106522

Flashback Arrestor Regulator End High Flow Oxygen Flashback Arrestor Regulator End High Fl...

BOC FBAs conform to AS4603 and carry international approvals. Gases maximum working pressure: Oxygen (O) 2,500 kPa

#747782

Circle Guide Suits BOC Gas Torch

Rotating head design enables holes to be cut from one position, holes from 25-650mm cut with proffesional results.

#B10N23

BOC TIG Std Collet 1.6mm 5pk

A pack of 5 standard TIG collets suitable for use with Series 17, 18 and 26 TIG Torches

#B10N24

BOC TIG Std Collet 2.4mm 5pk

A pack of 5 standard TIG collets suitable for use with Series 17, 18 and 26 TIG Torches