TengTools

#SD501

Teng Magnetic Pick-Up Tool

Telescopic magnetic pick up with an extra strong magnet, a pocket clip and a maximum extension of 85cm.

#MB442-6

Teng MB H/D Side Cutter 160mm

Chrome molybdenum steel. 80° cutting edge angle. Single joint. Polished head. Rubber dipped handles. Length: 160mm Cuts piano wire: 2.0mm Cuts steel wire: 2.5mm Cuts iron wire: 2.5mm Cuts copper...

#490

Teng Straight Tin Snip 250mm

Made of drop forged chrome-moly steel. Hardened to HRC 60-62. Compound action. Handles of pressed sheet metal. Two component handle with hanging hole. With return spring and locking lever...

#3492AG-ER

Teng 3/4"Dr Torque Wrench 65-450Nm/48-330ft/lb L/R Teng 3/4"Dr Torque Wrench 65-450Nm/48-33...

Bi-directional for left/right hand threads with push through square drive and flip reverse ratchet action for torque checking. Equipped with angular gauge for after tightening. Dual scale Nm &...

#1479MM

Teng Ball-End Metric Hex Key Set 1.5 - 10.0mm 9pc Teng Ball-End Metric Hex Key Set 1.5 - 1...

Chrome vanadium key sets supplied in folding plastic holder. Hex Keys with ball point head on the long key end - for 30° access. Sizes: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 & 10.0mm.

#1292AG-E4

Teng 1/2"Dr Torque Wrench 70-350Nm/50-250ft/lb Teng 1/2"Dr Torque Wrench 70-350Nm/50-25...

With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge...

#4002T

Teng Adjustable Wrench 150mm

Integral measurement scale on the jaw. Moving jaw does not protrude allowing use in confined spaces. Hole in the handle for tool securing when working at height. High grade chrome vanadium steel with...