TengTools

#WRPC10

Teng Punch & Chisel Set c/w Wall Rack 10pc Teng Punch & Chisel Set c/w Wall Rack 10...

6 parallel pin punches, 3 cold chisels and a center punch. Supplied on wall rack. Set Contents: Punches, tip diamerer: 3, 4, 5, 6, 7, 8mm Cold chisels, width x length: 18 x 150, 25 x 200, 25 x...

#WRMBV04

Teng 1000V VDE Plier Set & Wall Rack 4pc

Teng Tools Rack with 4 insulated pliers with two component handles, heavy duty side cutters, combination pliers, side cutters and long nose pliers. Each plier is individually tested and approved...

#3892AG-E1

Teng 3/8"Dr Torque Wrench 5-25Nm (4-18ft/lb) Teng 3/8"Dr Torque Wrench 5-25Nm (4-18ft...

Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque...

#401-10

Teng Power Grip Plier Curved Jaw 250mm

Chrome Vanadium. Self locking with release lever. Locking nut on adjustment knob for presetting.

#3892AG-E3

Teng 3/8"Dr Torque Wrench 20-110Nm (15-75ft/lb) Teng 3/8"Dr Torque Wrench 20-110Nm (15-7...

3/8" drive torque wrench which can be used for both tightening and final checking of the torque. The torque wrench is reversible with a lever but only for right hand action for torque checking...

#401-12F

Teng Power Grip Plier Flat Jaw 300mm

Quality locking pliers, self locking with release lever and locking nut for presetting. 401-12F – 300mm (12”) Flat Jaw, 50mm capacity.

#406S

Teng C-Clamp Locking Plier (NP) 285mm

C-shaped jaws for sections. Self- locking With single non- pinch release lever. Nickel plated.

#600108

Teng ROE Combination Spanner 1/4"

Manufactured and designed in accordance with DIN3113A from high grade Chrome Vanadium Steel. Same dimensions at both ends. The 12 point ring head is offset at a 15 degree angle. Hip grip ring ends...

#600110R

Teng Reversible Ratchet Combination Spanner 5/16" Teng Reversible Ratchet Combination Span...

Reversible ratchets with 15 degree offset 12 point heads. Flip reverse action for one handed direction change. 72 teeth providing a 5 degree increment for a smooth action. Manufactured and designed...

#600110

Teng ROE Combination Spanner 5/16"

Manufactured and designed in accordance with DIN3113A from high grade Chrome Vanadium Steel. Same dimensions at both ends. The 12 point ring head is offset at a 15 degree angle. Hip grip ring ends...

#600112R

Teng Reversible Ratchet Combination Spanner 3/8" Teng Reversible Ratchet Combination Span...

Reversible ratchets with 15 degree offset 12 point heads. Flip reverse action for one handed direction change. 72 teeth providing a 5 degree increment for a smooth action. Manufactured and designed...

#600114R

Teng Reversible Ratchet Combination Spanner 7/16" Teng Reversible Ratchet Combination Span...

Reversible ratchets with 15 degree offset 12 point heads. Flip reverse action for one handed direction change. 72 teeth providing a 5 degree increment for a smooth action. Manufactured and designed...