Products
Catalogues
Single contact, single filament. Voltage = 12V Base = BAY9s / BAX9s (YL126) ADR 51/00 category = YL126 H6W
Single contact, single filament. Voltage = 12V Base = BAY9s / BAX9s (YL126) ADR 51/00 category = YL126, H6W
Retro reflector 60mm in diameter complete with mounting screw, 22cm2. Reflectors with self adhesive are ECE certified.
Single contact, single filament. Voltage = 12V Base = BAY9s / BAX9s (YL126) ADR 51/00 category = YL126, H6W
LongLife (LL) bulbs are increasing in popularity for applications such as taxis and drivers using headlamps during the day. Many new vehicles now come equipped with LongLife bulbs as a standard...
This bulb outshines a standard headlamp bulb by achieving up to 30% greater illumination on the road in the 50-75m range allowing better orientation and earlier reaction to hazards. Voltage =...
Voltage = 24V Power Consumption = 100W Base = P14.5s
These bulbs come close to emulating the colour of a Xenon HID lamp. The high colour temperature of the Cool Blue bulbs creates the crisp white light which provides illumination that is conspicuous...
This bulb outshines a standard headlamp bulb by achieving up to 30% greater illumination on the road in the 50-75m range allowing better orientation and earlier reaction to hazards. Voltage =...
This innovative, light weight HELLA LED Light Bar is the first such lamp with a body manufactured entirely from non corrosive, thermally conductive high performance plastics. This aerodynamic...
Rotary headlamp switch with round knob. Mounting = 12.5mm diameter opening. Terminals = 5 Maximum load = 12V 23A. 24V 11.5A Protection = IP 53 (Protection against dust and water spray)
To suit wide marker and signal lamps with 29mm wide rim. Does not fit narrow rim lamps.
