PRODUCT INFORMATION
-
BLOX Safety Support block is designed to stabilise heavy loads that have been lifted for service, access or repair. The BLOX Safety Support is manufactured from a uniquely formulated compound consisting of recycled high-density polyethylene (HDPE) / Wood / and Polyurethane to create an alternative to traditional timber blocks. Typically, individual pieces are referred to as “blocks” and the structure or stacks are commonly described as “cribs”.
-
BLOX Safety Support and Jacking Block. Stackable Cup and Cone Profile 16cm x 30cm x 60cm, with Lanyard Orange.
-
Working Load Limit (WLL): 122kg/cm2 (12MPa) at ambient/operating temperature of 250 C refer section 3 – Working Load Limit for further WLL data.
-
Total Block WLL: 219,000kg at 250 C
Part No
BP163060LOBrand
BLOXWrite a Review
